ORBIVED HIGH TEMPERATURE ACETIC SEALANT is an acetic cure silicone rubber sealant adhesive. Forms a leak proof layer. Resistant to fuels and oils.
Suitable for replacing boiler seals, heating and exhaust systems, furnace and kiln finishes, etc. Effectively replaces paper, felt and cork gaskets.
High temperature resistant:
Codes 2560 and 6413 (Red): from -30 to + 260 ° C and flashing to + 315 ° C.
Forms film in 10 minutes and total cure occurs in 24 hours.
High adhesion on various substrates.
Replaces gaskets made of paper, cork, felt etc.
Clean the surfaces where the product will be applied by removing oil, rust, grease and other dirt. Dry the surfaces thoroughly. Apply uniform straight lines on each surface, then join the parts together.
SQUEEZE TUBE – Puncture the tube nozzle using the cap itself. Screw the applicator nozzle on and cut to desired thickness at an angle of 45 °.
CARTRIDGE – Cut cartridge nozzle above the thread. Insert the applicator nozzle and cut it to the desired thickness at an angle of 45º. Apply masking tape to the sides of the surfaces for protection.
Insert the cartridge into the applicator / gun. With the 45 ° inclined applicator apply the ORBIVED. Finish immediately using a spatula and then remove the masking tape.
Codes:
ORBIVED 250g – 6413
ORBIVED 50g – 2560
Packaging:
250 g cartridge / squeeze tube – 50 g
Box with 12 units.
Storage:
Store in a cool and dry place. Keep the product in its original packaging for product quality preservation. Keep out of reach of children and pets. Keep away from contact with food.
